7 Solid Reasons To Avoid Led Lights

Whereas the marketplace for colored (Red, Green, Blue) RGB LEDs is well established, the market for white LEDs is still growing. Why? Once you think about industries that still depend on white, non-LED lighting, such as for example televisions, automotive manufacturers, computer monitors, notebook computers, LCD backlights, etc., it is possible to understand the push to become the leader in white LED manufacturing.

Lots of people are surprised that a business would avoid a revenue generating opportunity that converting a home or business to LED would create. However, just because replacement white LED bulbs and retrofits are finally that you can buy, does not imply that they should be on your immediate grocery list. In Round Led High Bay Lights , the marketplace for colored and color-changing LEDs is mature. While engineers remain finding ways to make them brighter and much more efficient, the holy grail of the LED industry is in developing volume production of high-efficiency, high-brightness white LEDs.

It may be simpler to think of colored LEDs (RGB) and white LEDs when it comes to another industry: Automotive. RGB LEDs are like the internal combustion engine: Reliable, abundant, simple to operate and manufacture, and fairly well developed with regards to the potential for new or breakthrough technologies. You will find plenty on manufacturers and each has their own group of patents and “tricks of the trade” to help give themselves some marketing leverage on the competition. White LEDs are just like the alternative energy industry for transportation: Quite varied, still relatively “new”, still needing to be market proven, more expensive, more challenging to control.

There are several manufacturers, each utilizing a different technology or combination of technologies to accomplish what they believe may be the “another big thing.” Following this analogy, RGB LEDs are mature enough to compete on cost alone and the drop in costs is what fuels new applications for colored LEDs that had not been considered previously. White LEDs, on the other hand remain developing technically and should not be shopped predicated on cost alone. The need for quality and longevity is what fuels the further research and development into white LEDs.

11 POINTS TO CONSIDER IN DETERMINING LED UPGRADES

Because you can find so many variables that require to be considered, making a quick and easy recommendation about transitioning to white LEDs isn’t possible. To have a jump start on the future, consider every lighting source in each room and establish what it’s primary purpose is. When you have done this, review the next what to help determine where on the priority purchase-list each replacement ought to be. Below are a few general guidelines to help you determine if an LED upgrade may be the right choice for you:

1.) Is the lighting located in a home where the primary resident is older or has mobility issues?

If the LED replacement produces adequate light levels, LED alternatives are ideal for use in homes where safety is really a top priority. Realizing that an ill or older person will not need to change a burned-out lamp again can offer peace-of-mind.

2.) Is initial cost a primary element in determining if you are going to upgrade?

The current nature of the white LED market implies that prices remain relatively high, especially in comparison to traditional lighting. As an early adopter means paying reduced; are you more comfortable with knowing you might have paid less for the same technology in the event that you had waited?

3.) May be the light situated in bright daytime sunlight or a location of high heat?

High levels of heat will noticeably shorten the lifespan of any LED, especially white LEDs. When contemplating LEDs, try to ensure that both fixture and the positioning enable adequate passive cooling to avoid color-shift and longevity issues. It is a much bigger concern when contemplating retrofit bulbs versus considering a “total package” LED fixture and lamp.

4.) Are you needing to reduce the heat output from a traditional light source?

In bathrooms, laundry rooms and small spaces, conventional lighting can produce uncomfortable heat. LED lighting is ideal for these areas since they produce no heat and because affordably illuminating smaller areas with LEDs presents much less of a challenge.

5.) Is the lighting located in an area of rough service or environmental extremes?

Garage door openers, unheated/cooled utility rooms and outdoor workshops place extreme demands of lighting equipment. Vibrations that may break a light bulb filament and winter that can cause a fluorescent tube to flicker are of no consequence to LED lighting, making these replacements a simple decision.

6.) May be the brightness critical to the application?

LEDs are directional naturally, so attempting to meet a particular brightness expectation over a wide area is not the very best usage of LED lamps. The existing crop of standard fluorescent tubes or high-bay lighting is going to be better for these applications.

7.) Are you trying to retrofit an existing lighting fixture to support an LED replacement?

Most current lights are created to capture and reflect as much light as you possibly can from conventional light sources that produce light from all 360 degrees. Because LEDs emit very directional light, there are often many compromises that must be made by manufacturers to make LEDs “work” for the best number of retrofits. When possible, instead of retrofit bulbs look at a “total package” LED lighting fixture that has been designed from the ground up to efficiently use LEDs.

8.) May be the light output and quality of the LED version acceptable in comparison to your existing lighting?

With the variety of lighting technology available (incandescent, fluorescent, LED, etc.) the only way to get an accurate idea of the way the lighting will perform would be to compare the light output or lumen and color temperature specifications rather than the wattage as is typical of all folks raised with traditional lighting in the house. The US Department of Energy has devised a standardized “lighting facts” label similar in concept to the nutrition label found on foods, to help consumers compare lighting.

9.) Are the bulbs you’re considering replacing difficult to access or reach?

If they are, LED replacements are great candidates because after they are changed, you will likely never have to change them again since LEDs do not “burn up” just like a conventional bulb.

10.) Are you currently replacing all the lights in a particular area or just a single bulb?

Unless you know the color temperature of all lighting in the area, play the role of consistent in whatever lighting technology you select. For example, if your room uses primarily halogen lighting, chances are a warm color temperature and changing an individual reading lamp to LED with a cooler lighting temperature will not only be noticeable, but may also be distracting.

11.) Does the power savings and/or profits on return (ROI) make it worthwhile at this stage?Prepare an energy audit using free web calculators to determine how much money you will save on energy and what the potential profits on return is. Just enter your time rates, the total wattage of one’s conventional lighting and the total wattage of the LED lighting you are considering and the calculator will let you know exactly how much money each technology can cost you per year.

As you can see, every lighting situation is highly recommended individually against the above checklist. Doing this will help you to determine LED upgrade plans that fit within both your budget and your expectations. In general, LED lighting will continue steadily to improve in both output and efficiency every year similar to the way the non-public computer market has evolved. What could possibly be considered a “middle of the street” LED lamp today, was very likely considered reduced product a year or two ago. Prioritizing your LED lighting purchases in order that the basics are covered first and delaying your more demanding lighting requirements because the technology improves will ensure a cushty transition to tomorrows lighting technology.

Leave a Reply

Your email address will not be published. Required fields are marked *